Siser Easypuff Metallic Raised-Effect Htv – 12″ × 5 Yards

Application Instructions

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 280°F/138°C
• Use medium pressure for 8-10 seconds
• Peel carrier hot
• Press again for 8–10 seconds

Easy Puff Metallic differs from our standard Easy Puff line and REQUIRES a 2-press application process. After the first press, the carrier must be peeled hot and the design should be covered with a cover sheet, then pressed a second time to activate the puff effect.
Because achieving proper pressure is key for activating the “puff” effect, it is not recommended to apply this material with a home iron.

Care

• Wait 24 hours before first wash
• Machine wash cold with mild detergent
• Do not dry clean
• Recommended to hang item to dry
• If using a machine dryer, use at low setting
• Do not bleach

Recommended Accessories

• Siser Hook Tool
• Siser Color Guide
• Pro-Grade Non-Stick Sheet
• Pro-Grade Parchment Paper
• Sof-Fusion Pressing Pillows